Super easy charger to use - This is basically just like the Hyperion 606i AC/DC version. Same wattage and abilities. Can charge all your 2s-6s lipos (with correct tap adapter if needed). This can also charge NIMH, Nicad, Lead Acid and A123 (LiFePo4 style) batteries. Comes with various connectors as well (Deans, JST, Glow plug, Hitec and even an alligator clip) for various other charging. You can also use our adapter creator to do custom charge leads: simply choose Banana plug as one end and then the plug you want on the other. This charger uses adapter boards instead of plugging directly into the side of the unit. It comes with the align (XH) style board as standard. The other boards are available under the Charger Accy area.

Below is a picture of what the charger comes with:

SPECS:
Input Range: DC 11-18v AC 100-240v
Charge current range: 0.1 - 5.0 Amps
Discharge current range: 0.1 - 1.0 Amps
Charge power limited to: 50 watts max
Discharge power limited to: 5 watts max
Balance Current: max. 300mA
Balance Tolerance: +/- 0.01v
Nicd,Nimh Cell count: 1-15 cells
Lipo cell charge counts: 1s-6s
Lithium Types supported: Lipo, Li-ion, Li-Fe
Pb battery voltage: 2-20v
Weight: 647 grams
Dimensions: 134 x 142 x 36 mm
This unit has an Exhaust fan

Super easy charger to use - This is a step up from the more expensive Hyperion 606i AC/DC charger. 30 more watts (60% more power) than the Hyperion 606i. Can charge all your 2s-6s lipos (with correct tap adapter if needed). This can also charge NIMH,Nicad, Lead Acid and A123 (LiFePo4 style) batteries. Comes with various connectors as well (Deans, JST, Glow plug, Hitec and even an alligator clip) for various other charging. You can also use our adatper creator to do custom charge leads: simply choose Banana plug as one end and then the plug you want on the other. This charger uses adapter boards instead of plugging directly into the side of the unit. It comes with the align (XH) style board as standard. The other boards are available under the Charger Accy area.

Below is a picture of what the charger comes with:

SPECS:
Input Range: DC 11-18v AC 100-240v
Charge current range: 0.1 - 6.0 Amps
Discharge current range: 0.1 - 2.0 Amps
Charge power limited to: 80 watts max
Discharge power limited to: 10 watts max
Balance Current: max. 300mA
Balance Tolerance: +/- 0.01v
Nicd,Nimh Cell count: 1-18 cells
Lipo cell charge counts: 1s-6s
Lithium Types supported: Lipo, Li-ion, Li-Fe
Pb battery voltage: 2-24v
Weight: 640 grams
Dimensions: 145 x 145 x 56 mm
This unit has an Exhaust fan

Integrated (built-in) Hyperion LBA balancer
1~6 cell Li-Poly, Li-Ion or A123 charger / balancer
1~14 cell NiCad / NiMH
1~6 cell Sealed Lead Acid
6S, 6A, 50 watts
10 User-definable Memory Positions
Includes:
AC input cable
DC input cable with Clamps
2S~6S balancer multi adapter HP-LBA10-HP
2S~6S balancer multi adapter HP-LBA10-XH
Optional accessories available below:
USB Programmer Cable for upgrades
6" balancer board harness
Requires:
Output cable with 4mm male bullet