Input Range: DC11-18v
Charge current range: 0.1 - 10.0 Amps
Discharge current range: 0.1 - 5.0 Amps
Max wattage: 200 watts max
Balance Current: max. 300mA
Balance Tolerance: +/- 0.01v
Nicd,Nimh Cell count: 1-18 cells
Lipo cell counts: 1-6s
Lithium Types supported: Lipo, Li-ion, Li-Fe
Pb battery voltage: 2-24v Weight: 510 grams Dimensions: 145 x 98 x 30 mm

Charger comes with: Temp Probe
USB Cable
Jst XH (Align) Adapter board for balancing (2s-6s)
Charge leads (Deans,glo plug,allgator clips, hitec RX plug, Jst)
Also comes packed in aluminum style storage case.

Other boards for Thunder Power, Hyperion, Poly RC are also available under lipo accessories.

Super easy charger to use - This is basically just like the Hyperion 606i AC/DC version. Same wattage and abilities. Can charge all your 2s-6s lipos (with correct tap adapter if needed). This can also charge NIMH, Nicad, Lead Acid and A123 (LiFePo4 style) batteries. Comes with various connectors as well (Deans, JST, Glow plug, Hitec and even an alligator clip) for various other charging. You can also use our adapter creator to do custom charge leads: simply choose Banana plug as one end and then the plug you want on the other. This charger uses adapter boards instead of plugging directly into the side of the unit. It comes with the align (XH) style board as standard. The other boards are available under the Charger Accy area.

Below is a picture of what the charger comes with:

SPECS:
Input Range: DC 11-18v AC 100-240v
Charge current range: 0.1 - 5.0 Amps
Discharge current range: 0.1 - 1.0 Amps
Charge power limited to: 50 watts max
Discharge power limited to: 5 watts max
Balance Current: max. 300mA
Balance Tolerance: +/- 0.01v
Nicd,Nimh Cell count: 1-15 cells
Lipo cell charge counts: 1s-6s
Lithium Types supported: Lipo, Li-ion, Li-Fe
Pb battery voltage: 2-20v
Weight: 647 grams
Dimensions: 134 x 142 x 36 mm
This unit has an Exhaust fan

Super easy charger to use - This is a step up from the more expensive Hyperion 606i AC/DC charger. 30 more watts (60% more power) than the Hyperion 606i. Can charge all your 2s-6s lipos (with correct tap adapter if needed). This can also charge NIMH,Nicad, Lead Acid and A123 (LiFePo4 style) batteries. Comes with various connectors as well (Deans, JST, Glow plug, Hitec and even an alligator clip) for various other charging. You can also use our adatper creator to do custom charge leads: simply choose Banana plug as one end and then the plug you want on the other. This charger uses adapter boards instead of plugging directly into the side of the unit. It comes with the align (XH) style board as standard. The other boards are available under the Charger Accy area.

Below is a picture of what the charger comes with:

SPECS:
Input Range: DC 11-18v AC 100-240v
Charge current range: 0.1 - 6.0 Amps
Discharge current range: 0.1 - 2.0 Amps
Charge power limited to: 80 watts max
Discharge power limited to: 10 watts max
Balance Current: max. 300mA
Balance Tolerance: +/- 0.01v
Nicd,Nimh Cell count: 1-18 cells
Lipo cell charge counts: 1s-6s
Lithium Types supported: Lipo, Li-ion, Li-Fe
Pb battery voltage: 2-24v
Weight: 640 grams
Dimensions: 145 x 145 x 56 mm
This unit has an Exhaust fan

Integrated (built-in) Hyperion LBA balancer
1~6 cell Li-Poly, Li-Ion or A123 charger / balancer
1~14 cell NiCad / NiMH
1~6 cell Sealed Lead Acid
6S, 6A, 50 watts
Includes:
Input cable with Clamps
Output cable with 4mm connectors
2S~6S balancer multi adapter HP-LBA10-HP
Available Now:
USB Programmer Cable
6" balancer board harness

Integrated (built-in) Hyperion LBA Balancer
2~4 cell Li-Poly or A123 charger / balancers
4 cell at 3.0A max charge rate
Great beginners charger / balancer
Includes:
Input cable with clips
Output cable with 4mm male connectors
2S~4S balancer multi adapter
Available Now:
6" balancer board harness

Integrated (built-in) Hyperion LBA balancer
1~6 cell Li-Poly, Li-Ion or A123 charger / balancer
1~14 cell NiCad / NiMH
1~6 cell Sealed Lead Acid
6S, 6A, 50 watts
10 User-definable Memory Positions
Includes:
AC input cable
DC input cable with Clamps
2S~6S balancer multi adapter HP-LBA10-HP
2S~6S balancer multi adapter HP-LBA10-XH
Optional accessories available below:
USB Programmer Cable for upgrades
6" balancer board harness
Requires:
Output cable with 4mm male bullet

Two integrated (built-in) Hyperion LBA Balancer
1~12 cell Li-Poly, Li-Ion or A123 charger / balancers
1~16 cell NiCad / NiMH
1~12 cell Sealed Lead Acid
2 x 6S, 15.0A max, 360 watts
50 watt discharge feature per port
Includes:
Input cable with 4mm Male Connectors + Clamps
2 sets output cable with 4mm connectors
2 balancer multi adapters HP-LBA10-HP
Built-in USB data cord w/supplied cable
Available Now:
6" balancer board harness
Temperature Sensor

Integrated (built-in) Hyperion LBA Balancer
1~7 cell Li-Poly, Li-Ion or A123 charger / balancer
1~16 cell NiCad / NiMH
1~12 cell Sealed Lead Acid
7S, 20A, 250 watts
Network 2 units for 500 watts using EOS-0610i-MSC
80W/10A max discharge limits
Includes:
Input cable with 4mm Male Connectors + Clamps
Output cable with 4mm connectors
2S~7S balancer multi adapter HP-LBA7-HP
Built-in USB data cord w/supplied cable
Available Now:
USB Programmer Cable for upgrades
6" balancer board harness
Temperature Sensor

1~10 cell Li-Poly charger
220 watts, 10.0Ah to 5 cells
Data port for TP205V or TP210V balancers
Includes:
Data Port Cable

1~4 cell Li-Poly charger 300, 500, 800, 1300, 2000 & 2500mAh settings
Safe mode automatic cell count
Push button controls

1~5 cell Li-Poly charger
3.5A max at 3 cells, 3.0A max at 4 cells
Communication port for TP balancers
Includes:
Data Port Cable

Will charge, balance, discharge and cycle batteries
Up to 10.0A, 80 watts max
1~6 cell Li-Poly / A123 cells
14 cell NiCd / NiMH
6V, 12V or 24V Sealed Lead Acid
Includes:
2S-6S adapter for TP or Align battery taps
Requires:
Output cables with 4mm male bullet